Click image to view full size image
It adopts the most advanced PWM (Pulse Width Modulation) digital control technology, It is constant voltage led full-touch wall panel RGB controller with RF button remote, specially designed for RGB Led lighting. For instance, Led module, flexible Led strip, etc. To select the desired light colors or modes, not only by the wall panel controller, but also by the wireless remote. It has many advantages such as beautiful appearance , easily to install, and simply to use. The dimension and structure of the wall panel are in line with the 86-type European standard.
Features:
●Designed for RGB constant voltage LED lights, Working voltage DC12-24V.
●Two channels output, Max. load current: 3CH*4A; Max. load power: 144W/12V; 288W/24V.
●The wall panel adopts the capacitive touch-sensitive design, unique appearance and easy-operation.
●Adopts RF 14keys remote control with fashion appearance, no need line-of-sight.
●RF frequency:2.4GHz, distance up to 20 meters.
●Memory function, each time power-on reserve the mode which stop in the last power-down.
●Amplifier is available to achieve more LEDs sync-control.
●Structure/dimension/installation of the wall panel according to the 86-type European standards.
Technical Parameters:
The wall panel controller:
| Working temperature | -20-60℃ | Working voltage | DC 12~24V |
Static power consumption |
<1W |
Connecting mode |
Common anode |
| Gray scale | 256 levels | RF frequency | 2.4GHz |
| N.W | 140g | G.W | 160g |
| External dimension | L86*W86*H34mm | Packing dimension | L150*W90*H60mm |
| Output | 3 channels | Max. Output current | 4A*3CH |
| PWM frequency | 700Hz | Max. Output power | 12V:144W, 24V:288W |
RF remote:
| Working temperature | -20-60℃ | Supply voltage | 3V（AAA battery*2） |
| Standby current | 18uA | Transmitter current | 25mA |
| Static consumption | 54uW | Launch consumption | 75mW |
| N.W | 65g | External dimension | L150*W40*H20mm |
| RF remote range | Up to 20m | RF frequency | 2.4GHz |
Dimension:
Interface Specification
|
Step 1: Fixing the bottom cover into the wall; |
Step 2: Fixing the metal frame into the bottom cover with screws( projecting part upward ) |
|
|
|
Step 3: Pressing the wall-panel into the metal frame, after connecting well the input and output wires. | |
|
|
Direction of use
●Connecting the load wire at first, followed by the power wire;
●Please ensure short circuit can not occur between wires before you turn on the power；
Buttons of wall-panel：
| Name | Description | Note |
| ON/OFF | Turn on/off the light. | This button is designed with backlight, convenient for users locate it in dark environment |
| Brightness + | Brightness add key, each touch add 1 level, 256 levels in total. | Long- press for fast adjusting |
| Brightness - | Brightness reduce key, each touch reduce1 level . | LLong-press for fast adjusting |
| Speed + | Speed add key, each touch add 1 level,100 levels in total. | Long-press for fast adjusting |
| Speed - | Speed reduce key, each touch reduce1 level . | Long-press for fast adjusting |
| Mode + | Goes to next mode with each touch | 17 modes in total |
| Mode - | Back to next mode with each touch |
RF BT remote control:
Name |
Description |
Set button |
For matching code with receiver. |
ON |
Turn on |
OFF |
Turn off |
Static color + |
Goes to next static color with each touch, 7 colors in total. |
Static color - |
Back to last static color with each touch, 7 colors in total. |
<span style="line-height: |
E-mail: 